$14.95

Download Now
Secure, instant download
Sold by onedollar on Tradebit
The world's largest download marketplace
3,274,270 satisfied buyers
Shopper Award

Canon iR5075, iR5065, iR5055 Series, Service Manual

Service Manual Canon iR5075, iR5065, iR5055 Series;
This manual, Canon iR5075, iR5065, iR5055 Series, is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Canon iR5075, iR5065, iR5055 Series copier.
You can print, zoom or read any diagram, picture or page from this Service Manual. Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Canon iR5075, iR5065, iR5055 Series photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:

Chapter 1. INTRODUCTION
1.1 System Construction
1.1.1 System Configuration with Pickup/Delivery Accessories (230V)EUR
1.1.2 System Configuration with Printing/Transmission Accessories (230V)EUR
1.1.3 Functions and Printing/Transmission Accessories (230V)
1.2 Product Specifications
1.2.1 Names of Parts
1.2.1.1 External view
1.2.1.2 Cross-Section
1.2.2 Using the Machine
1.2.2.1 Turning On the Power Switch
1.2.2.2 Turning Off the Power Switch
1.2.2.3 Control Panel
1.2.3 User Mode Items
1.2.3.1 Common Settings
1.2.3.2 Timer Settings
1.2.3.3 Adjustment/Cleaning
1.2.3.4 Report Output
1.2.3.5 System Control Settings
1.2.3.6 Copier Specifications
1.2.3.7 Transmission/Reception Settings
1.2.3.8 Box Settings
1.2.3.9 Printer Settings
1.2.3.10 Address Book Settings
1.2.3.11 Voice Guide Settings
1.2.4 Maintenance by the User
1.2.4.1 Cleaning
1.2.4.2 Checks
1.2.5 Safety
1.2.5.1 Safety of the Machine's Laser Unit
1.2.5.2 CDRH Regulations
1.2.5.3 Handling the Machine's Laser Unit
1.2.5.4 Safety of Toner
1.2.6 Product Specifications
1.2.6.1 Product Specifications
1.2.7 Function List
1.2.7.1 Paper Types
1.2.7.2 Printing Speed
1.2.7.3 Paper Types/Printing Speed (K paper)

Chapter 2. INSTALLATION
2.1 Making Pre-Checks
2.1.1 Selecting the installation space
2.1.2 Combination Table of Accessories
2.1.3 Checking the Contents
2.2 Unpacking and Installation
2.2.1 Unpacking and installation procedure
2.2.2 Unpacking
2.2.3 Installation of Scanner
2.2.4 Installation of Fixing Assembly
2.2.5 Checking of Charging Assembly and Dustproof Glass
2.2.6 Installation of Developing Assembly
2.2.7 Installation of Pickup Assembly
2.2.8 Attaching Deck Pressure Plate
2.2.9 Setting Toner Container
2.2.10 Connecting the Cable
2.2.11 Checking the Environment Switch
2.2.12 Attaching the Label
2.2.13 Connecting the Power Cord
2.2.14 Turning On the Main Power Switch
2.2.15 Toner Stirring
2.2.16 Media Cassette Settings
2.2.17 Index Paper Attachment
2.2.18 Changing the Media Size of the Front Deck (Left/Right)
2.2.19 Image/Operation Check in User Mode
2.2.20 Adjustment of Image Left End Margin
2.2.21 Adjustment of image leading edge margin
2.2.22 Mounting of the Host Machine
2.3 Checking the Connection to the Network
2.3.1 Overview
2.3.2 Checking the Connection to the Network
2.3.3 Using the Ping Command
2.3.4 Making a Check Using the Remote Host Address
2.4 Troubleshooting the Network
2.4.1 Troubleshooting the Network
2.4.2 Checking the Connection of the Network Cable
2.4.3 Making a Check Using a Loopback Address
2.4.4 Making a Check Using a Local Host Address
2.5 Relocating the Machine
2.5.1 Operation for Moving the Machine
2.6 Installing the Copy Tray
2.6.1 Confirming the contents
2.6.2 Power off of the host machine
2.6.3 Installation procedure
2.7 Installing the Card Reader
2.7.1 Notice At Installation
2.7.2 Confirming the contents
2.7.3 Power off of the host machine
2.7.4 Installation procedure
2.7.5 Installing for imageWARE Accounting Manager
2.8 Installing the Original Holder
2.8.1 Checking Contents
2.8.2 Installation Procedure
2.8.3 Checking Contents
2.8.4 Installation Procedure
2.9 Installing the Reader Heater
2.9.1 Checking the Contents
2.9.2 Power off of the host machine
2.9.3 Installation Procedure
2.10 Installing the Cassette Heater
2.10.1 Checking Components
2.10.2 Power off of the host machine
2.10.3 Installation Procedure of the Cassette Heater
2.11 Installing the Deck Heater
2.11.1 Checking the Parts to Install
2.11.2 Turning Off the Host Machine
2.12 Installing the Deck Heater (Large Deck)
2.12.1 Checking the Parts to Install
2.12.2 Turning Off the Host Machine
2.13 Installing the Voice Guidance Kit
2.13.1 A point to keep in mind at installation
2.13.2 Checking the Contents
2.13.3 Power off of the host machine
2.13.4 Installation Procedure
2.14 Installing the Wireless Network Interface Adapter
2.14.1 Points to Note When Installing
2.14.2 Checking the Contents
2.14.3 Power off of the host machine
2.14.4 Installation Procedure
2.14.5 Affixing the Label

Chapter 3. BASIC OPERATION
3.1 Construction
3.1.1 Functional Construction
3.1.2 Wiring Diagram of the Major PCBs
3.1.3 Controlling the Main Motor (M2)
3.2 Basic Sequence
3.2.1 Basic Sequence of Operation (at power-on; 30-sec start-up mode)
3.2.2 Basic Sequence of Operation (at power-on; low-temperature start-up mode)
3.2.3 Basic Sequence of Operation (at power-on; high-humidity start-up mode)
3.2.4 Basic Sequence of Operation (at time of copying/printing)

Chapter 4. MAIN CONTROLLER
4.1 Construction
4.1.1 Construction and Mechanisms
4.2 Construction of the Electrical Circuitry
4.2.1 Main Controller PCB
4.2.2 HDD
4.3 Start-Up Sequence
4.3.1 Overview
4.3.2 Start-Up Sequence
4.4 Shut-Down Sequence
4.4.1 Overview
4.4.2 Flow of Operation
4.5 Image Processing
4.5.1 Overview of the Image Flow
4.5.2 Construction of the Image Processing Module
4.5.3 Reader Unit Input Image Processing
4.5.4 Compression/ Extension/ Editing Block
4.5.5 Printer unit Output Image Processing
4.6 Flow of Image Data
4.6.1 Flow of Image Data According to Copy Functions
4.6.2 Flow of Image Data for the Box Function
4.6.3 Flow of Image Data for the SEND Function
4.6.4 Flow of Image Data for the Fax Transmission
4.6.5 Flow of Image Data for the Fax Reception Function
4.6.6 Flow of Image Data for the PDL Function
4.7 Parts Replacement Procedure
4.7.1 Main Controller Box
4.7.1.1 Before Removing the Main Controller Box
4.7.1.2 Removing the Main Controller Box
4.7.2 Main Controller PCB
4.7.2.1 Before Removing the Main Controller PCB
4.7.2.2 Removing the Main Controller PCB
4.7.2.3 When Replacing the Main Controller PCB
4.7.3 SDRAM
4.7.3.1 Before Removing the SDRAM
4.7.3.2 Removing the SDRAM
4.7.4 Boot ROM
4.7.4.1 Before Removing the Boot ROM
4.7.4.2 Removing the Boot ROM
4.7.5 HDD
4.7.5.1 Before Removing HDD
4.7.5.2 Removing the HDD
4.7.5.3 After Replacing the HDD
4.7.6 Video PCB
4.7.6.1 Before Removing the Video PCB
4.7.6.2 Removing the Video PCB
4.7.7 Controller Fan
4.7.7.1 Before Removing the Controller Cooling Fan
4.7.7.2 Removing the Controller Cooling Fan

Chapter 5. ORIGINAL EXPOSURE SYSTEM
5.1 Construction
5.1.1 Specifications, Controls, and Functions
5.1.2 Major Components
5.1.3 Construction of the Control System
5.1.4 Reader Controller PCB
5.2 Basic Sequence
5.2.1 Basic Sequence of Operations
5.2.2 Basic Sequence of Operation in Response to a Press on the Start Key
5.3 Various Control
5.3.1 Controlling the Scanner Drive System
5.3.1.1 Overview
5.3.1.2 Controlling the Scanner Motor
5.3.2 Enlargement/Reduction
5.3.2.1 Changing the Magnification in Main Scanning Direction
5.3.2.2 Changing the Magnification in Sub Scanning Direction
5.3.3 Controlling the Scanning Lamp
5.3.3.1 Overview
5.3.3.2 Scanning Lamp
5.3.3.3 Controlling the Activation
5.3.4 Detecting the Size of Originals
5.3.4.1 Overview
5.3.4.2 Points of Measurement Used for Original Size Identification
5.3.4.3 Overview of Operation
5.3.5 Dirt Sensor Control
5.3.5.1 Dust Detection in Stream Reading Mode
5.3.5.2 White Plate Dust Detection Control
5.3.6 Image Processing
5.3.6.1 Overview
5.3.6.2 CCD Drive
5.3.6.3 CCD Output Gain Correction, Offset Correction
5.3.6.4 CCD Output A/D Conversion
5.3.6.5 Outline of Shading Correction
5.3.6.6 Shading Adjustment
5.3.6.7 Shading Correction
5.4 Parts Replacement Procedure
5.4.1 CCD Unit
5.4.1.1 Before Removing the CCD Unit
5.4.1.2 Removing the CCD Unit
5.4.1.3 When Replacing the CCD Unit
5.4.2 Copyboard glass
5.4.2.1 Removing the Copyboard Glass
5.4.2.2 When Replacing the Copyboard Glass
5.4.3 Scanning Lamp
5.4.3.1 Before Removing the Scanning Lamp
5.4.3.2 Removing the Scanning Lamp
5.4.3.3 When Replacing the Scanning Lamp
5.4.4 Reader Controller PCB
5.4.4.1 Before Removing the Reader Controller PCB
5.4.4.2 Removing the Reader Controller PCB
5.4.4.3 After Replacing the Reader Controller PCB
5.4.5 Interface PCB
5.4.5.1 Before Removing the Interface PCB
5.4.5.2 Removing the Interface PCB
5.4.6 Memory PCB
5.4.6.1 Before Removing the Memory PCB
5.4.6.2 Removing the memory PCB
5.4.7 Inverter PCB
5.4.7.1 Before removing the inverter PCB
5.4.7.2 Removing the Inverter PCB
5.4.7.3 After Replacing the Inverter PCB
5.4.8 Scanner Motor
5.4.8.1 Before Removing the Scanner Motor
5.4.8.2 Removing the Scanner Motor
5.4.8.3 Mounting the Scanner Motor
5.4.9 ADF Open/Close Sensor
5.4.9.1 Before Removing the ADF Open/Close Sensor
5.4.9.2 Removing the ADF Open/Close Sensor
5.4.10 Scanner HP Sensor
5.4.10.1 Before Removing the Scanner HP Sensor
5.4.10.2 Removing the Mirror Base HP Sensor
5.4.11 Original Size Sensor
5.4.11.1 Before Removing the Original Size Sensor
5.4.11.2 Removing the original size sensor
5.4.12 Cooling Fan
5.4.12.1 Before Removing the Cooling Fan
5.4.12.2 Removing the Cooling Fan
5.4.13 Scanner Drive Cable
5.4.13.1 Outline
5.4.13.2 Before Removing the Scanner Drive Cable
5.4.13.3 Removing the Scanner Drive Cable
5.4.13.4 Fitting the Scanner Drive Cable
5.4.13.5 Adjusting the Position of the No. 1/No. 2 Mirror Base
5.4.14 Waste Toner Box Holder
5.4.14.1 Before Removing the Collecting Toner Bottle Holder
5.4.14.2 Removing the Collecting Toner Bottle Holder

Chapter 6. LASER EXPOSURE
6.1 Construction
6.1.1 Overview
6.1.2 Major Components
6.2 Basic Sequence
6.2.1 Basic Sequence of Operation (laser exposure)
6.3 Various Controls
6.3.1 Controlling the Laser Activation Timing
6.3.1.1 Generating the Sync Signal
6.3.1.2 Flow of the Sync Signal
6.3.2 Controlling the Intensity of Laser Light
6.3.2.1 Controlling the Laser Intensity
6.3.2.2 APC Control
6.3.3 Controlling the Laser Scanner Motor
6.3.3.1 Controlling the Laser Scanner Motor
6.4 Parts Replacement Procedure
6.4.1 Laser Scanner Unit
6.4.1.1 Removing the Laser Scanner Unit
6.4.1.2 When Replacing the Laser Scanner Unit

Chapter 7. IMAGE FORMATION
7.1 Construction
7.1.1 Overview
7.1.2 Major Components
7.2 Image Formation Process
7.2.1 Overview
7.3 Basic Sequence
7.3.1 At Power-On
7.3.2 At Time of Printing
7.4 Potential Control
7.4.1 Overview
7.4.2 Copier/Printer Potential Control
7.4.3 Determining the Primary Current
7.4.4 Determining the Laser Output
7.4.5 Determining the Developing Bias
7.4.6 APC Correction
7.4.7 Adjusting the Density in Various Modes
7.5 Charging Mechanism
7.5.1 Controlling Pre-Exposure LED
7.5.1.1 Pre-Exposure LED Control
7.5.2 Primary Charging Mechanism
7.5.2.1 Overview
7.5.2.2 Primary Charging Assembly Cleaning Mechanism
7.5.2.3 Others
7.5.3 Dust-Collecting Roller Bias
7.5.3.1 Overview
7.5.4 Pre-Transfer Charging Mechanism
7.5.4.1 Overview
7.5.4.2 Controlling the Output to Suit the Environment (fuzzy control)
7.5.4.3 Pre-Transfer Charging Assembly Cleaning Mechanism
7.5.4.4 Others
7.6 Drum Cleaner Unit
7.6.1 Overview
7.6.2 Detecting the State (full) of the Collecting Toner Case
7.6.3 Drum/Separation Claw Bias Control
7.7 Developing Assembly
7.7.1 Controlling the Developing Assembly Drive
7.7.2 Controlling the Developing Bias
7.7.3 Detecting the Toner Level and Controlling Toner Supply
7.8 Transfer Mechanism
7.8.1 Transfer Charging Mechanism
7.8.1.1 Overview
7.8.1.2 Controlling the Output to Suit the Environment (fuzzy control)
7.8.1.3 Transfer Charging Assembly Cleaning Mechanism
7.8.1.4 Others
7.9 Separation Mechanism
7.9.1 Separation Charging Mechanism
7.9.1.1 Overview
7.9.1.2 Correcting the Output to Suit the Environment and the Drum Surface Potential
7.9.1.3 Others
7.10 Parts Replacement Procedure
7.10.1 Process Unit
7.10.1.1 Before Removing Process Unit
7.10.1.2 Removing Process Unit
7.10.1.3 Mounting Process Unit
7.10.2 Pre-Exposure Lamp
7.10.2.1 Before Removing Pre-Exposure Lamp
7.10.2.2 Removing Pre-Exposure Lamp
7.10.2.3 Cleaning Primary Toner Blocking Sheet
7.10.3 Primary Charging Assembly
7.10.3.1 Before Removing Primary Charging Assembly
7.10.3.2 Removing Primary Charging Assembly
7.10.4 Pre-Transfer Charging Assembly
7.10.4.1 Before Removing Pre-Transfer Charging Assembly
7.10.4.2 Removing Pre-Transfer Charging Assembly
7.10.5 Photosensitive Drum
7.10.5.1 Points to Note When Handling Photosensitive Drum
7.10.5.2 Before Removing Photosensitive Drum
7.10.5.3 Removing Photosensitive Drum
7.10.5.4 Cleaning Photosensitive Drum
7.10.6 Drum Motor
7.10.6.1 Before Removing Drum Motor
7.10.6.2 Removing Drum Motor
7.10.7 Photosensitive Drum Heater
7.10.7.1 Points to Note When Handling Photosensitive Drum
7.10.7.2 Before Removing Photosensitive Drum Heater
7.10.7.3 Removing Drum Heater
7.10.7.4 Points to Note When Mounting Drum Heater
7.10.8 Cleaning Blade
7.10.8.1 Configuration
7.10.8.2 Before Removing Cleaning Blade
7.10.8.3 Removing Cleaning Blade
7.10.8.4 Mounting Cleaning Blade
7.10.9 Side Seal
7.10.9.1 Before Removing Side Seal
7.10.9.2 Removing Side Seal
7.10.10 Cleaner Scraper
7.10.10.1 Before Cleaning Cleaner Scraper
7.10.10.2 Cleaning Cleaner Scraper
7.10.11 Hopper Assembly
7.10.11.1 Before Removing Hopper Assembly
7.10.11.2 Removing Hopper Assembly
7.10.12 Hopper Supply Motor
7.10.12.1 Before Removing Toner Supply Motor
7.10.12.2 Removing Toner Supply Motor
7.10.13 Hopper Strring Motor
7.10.13.1 Before Removing Hopper Stirring Motor
7.10.13.2 Removing Hopper Stirring Motor
7.10.14 Developing Assembly
7.10.14.1 Removing Developing Assembly
7.10.14.2 Cleaning Developing Toner Blocking Sheet
7.10.15 Developing Cylinder
7.10.15.1 Before Removing Developing Cylinder
7.10.15.2 Removing Developing Cylinder
7.10.16 Developing Blade
7.10.16.1 Before Removing Developing Blade
7.10.16.2 Removing Developing Blade
7.10.16.3 Mounting Developing Blade
7.10.17 Transfer/Separation Charging Assembly
7.10.17.1 Removing Transfer/Separation Charging Assembly
7.10.17.2 Mounting Transfer/Separation Charging Assembly
7.10.18 Separation Claw/Separation Claw Drive Assembly
7.10.18.1 Before Removing Separation Claw Holder
7.10.18.2 Removing Separation Claw Holder
7.10.19 Potential Sensor Unit
7.10.19.1 Outline
7.10.19.2 Before Removing Potential Sensor Unit
7.10.19.3 Removing Potential Sensor Unit
7.10.20 Charging Wire
7.10.20.1 Outline
7.10.20.2 Routing Charging Wire
7.10.20.3 Routing Grid for Primary Charging Assembly
7.10.20.4 Adjusting Height of Charging Wire

Chapter 8. PICKUP/FEEDING SYSTEM
8.1 Construction
8.1.1 Specifications and construction
8.1.2 Arrangement of Rollers and Sensors
8.1.3 Outline of the Pickup Control System
8.1.4 Outline of the Pickup Assembly Motor Control System
8.2 Basic Sequence
8.2.1 Pickup from the Right Deck
8.2.2 Pickup from the Cassette 3
8.2.3 Pickup Retry Operation
8.3 Detecting Jams
8.3.1 Jam Detection Outline
8.3.1.1 Outline
8.3.1.2 Jam History
8.3.2 Delay Jams
8.3.2.1 Cassette Pickup Assembly (right deck, left deck, cassette 3/4)
8.3.2.2 Other Delay Jam
8.3.3 Stationary Jams
8.3.3.1 Common Delay Jams
8.3.3.2 Power-On Stationary Jam
8.4 Cassette Pick-Up Unit
8.4.1 Lifter Operation (cassette 3/4)
8.4.2 Detecting the Presence/Absence of Paper
8.4.3 Outline of the Paper Level Detection Mechanism
8.4.4 Paper Level Detection (cassette 3/4)
8.4.5 Identifying the Size of Paper (cassette 3/4)
8.4.6 Markings on the Width Guide Rail
8.4.7 Paper Size
8.5 Manual Feed Pickup Unit
8.5.1 Pickup Operation
8.5.2 Detecting the Size of Paper in the Manual Feed Tray
8.6 Deck
8.6.1 Lifter Operation (right/left deck)
8.6.2 Lifter Limiter (right/left deck) Control Circuit
8.6.3 Detecting the Presence/Absence of Paper
8.6.4 Outline of Paper Level Detection
8.6.5 Paper Level Detection Operation (right/left deck)
8.6.6 Identifying the Size of Paper (right/left deck)
8.7 Registration Unit
8.7.1 Outline
8.7.2 Control System
8.8 Duplex Feeding Unit
8.8.1 Moving the Paper to the Reversing Assembly After Printing on the 1st Side
8.8.2 Moving the Paper to the Duplexing Feed Assembly From the Reversing Assembly
8.8.3 Outline
8.8.4 Sequence of Printing Operation
8.8.5 Outline of Through-Path Operation
8.8.6 Through-Path Operation
8.8.7 Outline of Horizontal Registration Position
8.8.8 Horizontal Registration Position Detection Operation
8.9 Delivery
8.9.1 Reversal Delivery Operation
8.10 Cassette Heater
8.10.1 Timing of the Cassette Heater Supplied with Power
8.11 Parts Replacement Procedure
8.11.1 Pickup Roller
8.11.1.1 Before Removing the Pickup Roller
8.11.1.2 Removing the Pickup Roller
8.11.1.3 Points to Note When Mounting the Pickup Roller
8.11.2 Cassette Pickup Assembly
8.11.2.1 Removing the Cassette 3/4 Pickup Assembly
8.11.3 Cassette Pickup Motor
8.11.3.1 Before Removing the Cassette 3/4 Pickup Motor
8.11.3.2 Removing the Cassette 3/4 Pickup Motor
8.11.4 Cassette Lifter Motor
8.11.4.1 Removing the Cassette 3 Lifter Motor M20
8.11.4.2 Removing the Cassette 4 Lifter Motor M21
8.11.4.3 Adjusting the Position of the Lifter Motor M20/M21 of the Cassette 3/4
8.11.5 Left Deck Lifter Motor
8.11.5.1 Before Removing the Left Deck Lifter Motor
8.11.5.2 Removing the Left Deck Lifter Motor
8.11.6 Right Deck Lifter Motor
8.11.6.1 Before Removing the Right Deck Lifter Motor
8.11.6.2 Removing the Right Deck Lifter Motor
8.11.7 Right Deck Pickup Assembly
8.11.7.1 Removing the Right Deck Pickup Assembly
8.11.8 Left Deck Pickup Assembly
8.11.8.1 Removing the Left Deck Pickup Assembly
8.11.9 Left Deck Pickup Motor
8.11.9.1 Before Removing the Left Deck Pickup Motor
8.11.9.2 Removing the Left Deck Pickup Motor
8.11.10 Right Deck Pickup Motor
8.11.10.1 Before Removing the Right Deck Pickup Motor
8.11.10.2 Removing the Right Deck Pickup Motor
8.11.11 Left Deck Pickup Sensor
8.11.11.1 Before Removing the Left Deck Feeding Sensor
8.11.11.2 Removing the Left Deck Feeding Sensor
8.11.12 Left Deck Pickup Solenoid
8.11.12.1 Before Removing the Left Deck Pickup Solenoid
8.11.12.2 Removing the Left Deck Pickup Solenoid
8.11.12.3 Adjusting the Position of the Left Deck Pickup Solenoid
8.11.13 Manual Feed Pull-Out Roller Unit
8.11.13.1 Removing the Manual Feeding Pickup Roller Unit
8.11.14 Manual Feed Pull-Out Roller
8.11.14.1 Before Removing the Manual Feeding Pickup Roller
8.11.14.2 Removing the Manual Feeding Pickup Roller
8.11.15 Manual Feed Roller
8.11.15.1 Before Removing the Manual Feeding Roller
8.11.15.2 Removing the Manual Feeding Roller
8.11.16 Manual Separation Roller
8.11.16.1 Before Removing the Manual Separation Roller
8.11.16.2 Removing the Manual Separation Roller
8.11.16.3 Adjusting the Pressure of the Manual Separation Roller
8.11.17 Manual Feed Tray paper sensor
8.11.17.1 Removing the Manual Feeding Tray Sensor
8.11.18 Registration Roller
8.11.18.1 Before Removing the Registration Roller
8.11.18.2 Removing the Registration Roller
8.11.19 Pre-Registration Roller
8.11.19.1 Before Removing the Registration Lower Roller
8.11.19.2 Removing the Registration Lower Roller
8.11.20 Pre-Registration Motor
8.11.20.1 Before Removing the Registration Front Motor
8.11.20.2 Removing the Registration Front Motor
8.11.21 Registration Motor
8.11.21.1 Before Removing the Horizontal Registration Motor
8.11.21.2 Removing the Horizontal Registration Motor
8.11.22 Registration Sensor
8.11.22.1 Before Removing the Horizontal Registration Sensor
8.11.22.2 Removing the Horizontal Registration Sensor
8.11.23 Registration Clutch
8.11.23.1 Before Removing the Registration Clutch
8.11.23.2 Removing the Registration Clutch
8.11.24 Registration Brake Clutch
8.11.24.1 Before Removing the Registration Brake
8.11.24.2 Removing the Registration Brake
8.11.25 Feeding Roller
8.11.25.1 Before Removing the Feeding Roller
8.11.25.2 Removing the Feeding Roller
8.11.25.3 The Points to Mount the Feeding Roller
8.11.26 Vertical Path Roller
8.11.26.1 Before Removing the Vertical Path Roller
8.11.26.2 Removing the Vertical Path Roller
8.11.26.3 Removing the Vertical Path Roller 2/3
8.11.27 Vertical Path Motor
8.11.27.1 Before Removing the Vertical Path Upper Motor
8.11.27.2 Removing the Vertical Path Upper Motor
8.11.28 Vertical Path Duplex Motor
8.11.28.1 Before Removing the Vertical Path Duplex Motor
8.11.28.2 Removing the Vertical Path Duplex Motor
8.11.29 Vertical Path Lower Motor
8.11.29.1 Before Removing the Vertical Path Lower Motor
8.11.29.2 Removing the Vertical Path Lower Motor
8.11.30 Reversing Motor
8.11.30.1 Before Removing the Reversing Motor
8.11.30.2 Removing the Reversing Motor
8.11.30.3 Mounting the Reversing Motor
8.11.31 Fixing Feeding Unit Releasing Lever Sensor
8.11.31.1 Before Removing the Fixing Feeding Unit Release Lever Sensor
8.11.31.2 Removing the Fixing Feeding Unit Release Lever Sensor
8.11.32 Reversing Sensor
8.11.32.1 Before Removing the Reversing Sensor 1
8.11.32.2 Removing the Reversing Sensor 1
8.11.32.3 Before Removing the Reversing Sensor 2
8.11.32.4 Removing the Reversing Sensor 2
8.11.33 Reversing Unit
8.11.33.1 Before Removing the Reversing Flapper Solenoid
8.11.33.2 Removing the Reversing Flapper Solenoid
8.11.33.3 Mounting the Reversing Flapper Solenoid
8.11.34 Feeding Belt
8.11.34.1 Before Removing the feeding belt
8.11.34.2 Removing the feeding belt
8.11.35 Duplexing Unit
8.11.35.1 Before Removing the Duplex Feeding Unit
8.11.35.2 Removing the Duplex Feeding Unit
8.11.36 Duplex Feed Motor
8.11.36.1 Before Removing the Duplex Feeding Left Motor
8.11.36.2 Removing the Duplex Feeding Left Motor
8.11.36.3 Before Removing the Duplex Feeding Right Motor
8.11.36.4 Removing the Duplex Feeding Right Motor
8.11.37 Duplex Feed Sensor
8.11.37.1 Before Removing the Duplex Pre-Registration Sensor
8.11.37.2 Removing the Duplex Pre-Registration Sensor
8.11.38 Separation Roller
8.11.38.1 Before Removing the Separation Roller
8.11.38.2 Removing the Separation Roller
8.11.38.3 Points to Note When Mounting the Separation Roller
8.11.38.4 Adjusting the Pressure of the Deck/Cassette Separation Roller

Chapter 9. FIXING SYSTEM
9.1 Construction
9.1.1 Specifications, Control Mechanisms, and Functions
9.1.2 Major Components
9.1.3 IH Fixing Method (outline)
9.1.4 Limiting th Rise in Temperature at the Roller Edges by Use of a Flux blocking Plate (shutter)
9.2 Basic Sequence
9.2.1 Outline
9.2.2 30-Sec Start-Up Mode
9.2.3 Low-Temperature Environment Start-Up Mode
9.2.4 High-Humidity Environment Start-Up Mode
9.2.5 Recovery Mode
9.2.6 Standby Mode
9.2.7 Power Save Mode
9.2.8 Sleep Mode
9.2.9 Copying/Printing Mode
9.2.10 Down Sequence
9.2.11 Enhanced Fixing Mode
9.2.12 Heavy Paper Mode
9.2.13 Transparency Mode
9.2.14 Bond Paper Mode
9.3 Various Control Mechanisms
9.3.1 Fixing Drive System
9.3.1.1 Controlling the Drive of the Fixing Roller
9.3.1.2 Controlling the Drive of the Fixing Inlet Guide
9.3.1.3 Controlling the Reciprocating Movement of the Thermistor
9.3.1.4 Controlling the Reciprocating Mechanism of the Upper Separation Claw
9.3.1.5 Controlling the Drive of the Shutter
9.3.1.6 Controlling the Shutter Position
9.3.2 Cleaning
9.3.2.1 Controlling the Drive of the Cleaning Web
9.3.2.2 Controlling the Mechanism Used to Detect the Remaining Length of the Cleaning Web
9.3.3 Detecting the Passage of Paper
9.3.3.1 Preventing Wrapping of Paper
9.4 Protective Functions
9.4.1 Detecting an Error Using the Thermistor
9.4.2 Detecting an Error Using the Thermal Switch
9.4.3 Errors
9.5 Parts Replacement Procedure
9.5.1 Fixing/Feeding Assembly
9.5.1.1 Before Removing the Fixing/Feeding unit
9.5.1.2 Removing the Fixing/Feeding unit
9.5.2 Fixing Unit
9.5.2.1 Before Removing the Fixing Upper Unit
9.5.2.2 Removing the Fixing Upper Unit
9.5.3 Pressure Roller
9.5.3.1 Before Removing the Pressure Roller
9.5.3.2 Removing the Pressure Roller
9.5.4 Upper Fixing Roller
9.5.4.1 Before Removing the Fixing Roller
9.5.4.2 Removing the Fixing Roller
9.5.4.3 Points to Note When Mounting the Fixing Roller
9.5.4.4 Applying Grease After Replacing the Fixing Roller
9.5.4.5 Adjusting the Nip Width
9.5.5 External Delivery Roller
9.5.5.1 Before Removing the External Delivery Roller
9.5.5.2 Removing the External Delivery Roller
9.5.6 Internal Delivery Roller
9.5.6.1 Before Removing the Internal Delivery Roller
9.5.6.2 Removing the Internal Delivery Roller
9.5.6.3 Points to Note When Mounting the Internal Delivery Roller
9.5.7 Main Thermistor
9.5.7.1 Before Removing the Main Thermistor/Shutter Thermistor
9.5.7.2 Removing the Main Thermistor/Shutter Thermistor
9.5.7.3 Points to Note When Mounting the Main Thermistor/Shutter Thermistor
9.5.8 Sub Thermistor
9.5.8.1 Before Removing the Sub Thermistor
9.5.8.2 Removing the Sub Thermistor
9.5.8.3 Points to Note When Mounting the Sub Thermistor
9.5.9 Thermal Switch
9.5.9.1 Before Removing the Thermal Switch
9.5.9.2 Removing the Thermal Switch
9.5.10 Fixing Heater
9.5.10.1 Before Removing the Fixing Heater Unit
9.5.10.2 Removing the Fixing Heater Unit
9.5.11 Fixing Cleaning Belt
9.5.11.1 Before Removing the Fixing Web
9.5.11.2 Removing the Fixing Web
9.5.11.3 Cleaning the fixing oil dish and the fixing cleaning belt guide
9.5.11.4 Mounting the Fixing Web
9.5.11.5 After Replacing the Fixing Web
9.5.12 Fixing Jam Sensor
9.5.12.1 Before Removing the Delivery Jam Sensor
9.5.12.2 Removing the Delivery Jam Sensor
9.5.13 Claw Jam Sensor
9.5.13.1 Before Removing the Claw Jam Sensor
9.5.13.2 Removing the Claw Jam Sensor
9.5.14 External Delivery Sensor
9.5.14.1 Before Removing the External Delivery Sensor
9.5.14.2 Removing the External Delivery Sensor
9.5.15 Internal Delivery Sensor
9.5.15.1 Before Removing the Internal Delivery Sensor
9.5.15.2 Removing the Internal Delivery Sensor
9.5.16 Fixing Inlet Sensor
9.5.16.1 Before Removing the Fixing Inlet Sensor
9.5.16.2 Removing the Fixing Inlet Sensor
9.5.16.3 Adjusting the Fixing Inlet Guide
9.5.17 Fixing web sensor
9.5.17.1 Before Removing the Fixing Web Sensor
9.5.17.2 Removing the Fixing Web Sensor
9.5.18 Fixing shutter sensor
9.5.18.1 Before Removing the Shutter Sensor
9.5.18.2 Removing the Shutter Sensor
9.5.19 Fixing shutter motor
9.5.19.1 Before Removing the Shutter Motor
9.5.19.2 Removing the Shutter Motor
9.5.20 Fixing Inlet Guide Solenoid
9.5.20.1 Before Removing the Fixing Inlet Guide Solenoid (SL1)
9.5.20.2 Removing the Fixing Inlet Guide Solenoid (SL1)
9.5.20.3 Adjusting the Fixing Inlet Guide Solenoid (SL1)
9.5.21 Delivery Flapper Solenoid
9.5.21.1 Before Removing the Delivery Flapper Solenoid (SL5)
9.5.21.2 Removing the Delivery Flapper Solenoid (SL5)
9.5.21.3 Points to Note When Mounting the Delivery Flapper Solenoid (SL5)
9.5.22 Fixing Cleaning Web Solenoid
9.5.22.1 Before Removing the Fixing Web Solenoid (SL9)
9.5.22.2 Removing the Fixing Web Solenoid (SL9)
9.5.22.3 Adjusting the Fixing Web Solenoid (SL9)
9.5.23 Upper Separation Claw
9.5.23.1 Removing the Upper Separation Claw
9.5.23.2 Points to Note When Mounting the Upper Separation Claw
9.5.24 Lower Separation Claw
9.5.24.1 Before Removing the Lower Separation Claw (Unit)
9.5.24.2 Removing the Lower Separation Claw (Unit)

Chapter 10. EXTERNAL AND CONTROLS
10.1 Control Panel
10.1.1 Overview
10.1.2 LCD Indication Processing
10.1.3 Adjusting the LCD Contrast
10.1.4 Functions of the Control Panel CPU
10.2 Counters
10.2.1 Soft Counters
10.3 Fans
10.3.1 Arrangement, Functions, and Error Codes
10.3.2 Controlling the Speed of the Fans
10.3.3 Sequence of Operation
10.4 Power Supply System
10.4.1 Power Supply
10.4.1.1 Overview
10.4.1.2 Distribution of Power and the Switches
10.4.2 Rated Output of the DC Power Supply PCB
10.4.2.1 Rated Output of the DC Power Supply PCB
10.4.2.2 Rated Output of the Accessories Power Supply PCB
10.4.3 Protection Function
10.4.3.1 Protective Functions
10.4.4 Backup Battery
10.4.4.1 Backup Battery
10.4.5 Energy-Saving Function
10.4.5.1 Overview
10.4.5.2 SNMP setup
10.5 Parts Replacement Procedure
10.5.1 External Covers
10.5.1.1 Right Cover (Lower Rear)
10.5.1.2 Right Cover (Upper Rear)
10.5.1.3 Right Cover (Upper)
10.5.1.4 Left Cover (Upper)
10.5.1.5 Front Cover
10.5.1.6 Rear Cover (Upper)
10.5.1.7 Rear Cover (Lower)
10.5.1.8 Left Cover (Lower)
10.5.1.9 Left Cover (Middle)
10.5.1.10 Toner Supply Cover
10.5.1.11 Fixing/Feeding Unit Cover
10.5.1.12 Fixing Cover (Upper)
10.5.1.13 Fixing Cover (Lower)
10.5.1.14 Main Controller Box Cover
10.5.1.15 Reader Left Cover
10.5.1.16 Reader Right Cover
10.5.1.17 Reader Front Cover
10.5.1.18 Reader Rear Cover
10.5.2 Left Deck Drive Assembly
10.5.2.1 Before Removing the Left Deck Drive Assembly
10.5.2.2 Removing the Left Deck Drive Assembly
10.5.3 Manual Feed Pickup Drive Assembly
10.5.3.1 Before Removing the Manual Pickup Drive Assembly
10.5.3.2 Removing the Manual Pickup Drive Assembly
10.5.4 Vertical Path Drive Assembly
10.5.4.1 Before Removing the Vertical Path Drive Assembly
10.5.4.2 Removing the Vertical Path Drive Assembly
10.5.5 Waste Toner Drive Assembly
10.5.5.1 Before Removing the Collecting Toner Drive Assembly
10.5.5.2 Removing the Collecting Toner Drive Assembly
10.5.6 Main Drive Assembly
10.5.6.1 Fitting the Drive Belt
10.5.7 Cassette Pickup Drive Assembly
10.5.7.1 Before Removing the Cassette Pickup Drive Assembly
10.5.7.2 Removing the Cassette Pickup Drive Assembly
10.5.8 Fixing Drive Assembly
10.5.8.1 Before Removing the Fixing Drive Assembly
10.5.8.2 Removing the Fixing Drive Assembly
10.5.9 Power Supply Unit
10.5.9.1 Removing the Charger unit
10.5.9.2 Points to Note At Occurrence of Charger unit Malfunction
10.5.10 Duplex Unit PCB
10.5.10.1 Before Removing the Duplex unit PCB
10.5.10.2 Removing the Duplex Unit PCB
10.5.11 Control Panel
10.5.11.1 Before Removing Control Panel
10.5.11.2 Removing Control Panel
10.5.12 DC Controller PCB
10.5.12.1 Before Removing DC Controller PCB
10.5.12.2 Removing DC Controller PCB
10.5.12.3 When Replacing DC Controller PCB
10.5.13 Printer Power Supply PCB
10.5.13.1 Before Removing Printer Power Supply PCB
10.5.13.2 Removing Printer Power Supply PCB
10.5.14 Option Power Supply PCB
10.5.14.1 Before Removing Accessories Power Supply PCB
10.5.14.2 Removing Accessories Power Supply PCB
10.5.15 Fixing Heater Power Supply PCB
10.5.15.1 Before Removing Fixing Heater Power Supply PCB
10.5.15.2 Removing Fixing Heater Power Supply PCB
10.5.16 Anti-Rush Current PCB
10.5.16.1 Before Removing Anti-Rush Current PCB
10.5.16.2 Removing Anti-Rush Current PCB
10.5.17 High-Voltage Transformer (AC)
10.5.17.1 Before Removing High Voltage Transformer
10.5.17.2 Removing High Voltage Transformer
10.5.17.3 Removing High Voltage Transformer
10.5.18 HVT PCB
10.5.18.1 Before Removing HVT PCB
10.5.18.2 Removing HVT PCB
10.5.18.3 When Replacing HVT PCB
10.5.19 Separation Clew AC bias PCB
10.5.19.1 Before Removing Separation Claw AC PCB
10.5.19.2 Removing Separation Claw AC PCB
10.5.20 Motor Driver PCB
10.5.20.1 Before Removing Motor Driver PCB
10.5.20.2 Removing Motor Driver PCB
10.5.21 Primary Fan Duct
10.5.21.1 Before Removing Primary fan Duct
10.5.21.2 Removing Primary fan Duct
10.5.22 Primary Charging Assembly Fan
10.5.22.1 Before Removing Primary Charging Fan
10.5.22.2 Removing the Primary Charging Cooling Fan
10.5.24 Feeding Fan
10.5.24.1 Before Removing the Feeding Fan
10.5.24.2 Removing the Feeding Fan
10.5.25 HVT Fan
10.5.25.1 Before Removing the HVT Fan
10.5.25.2 Removing the HVT Fan
10.5.26 Duplex Feed Fan
10.5.26.1 Before Removing the Duplex Feeding Fan
10.5.26.2 Removing the Duplex Feeding Fan
10.5.27 Exhaust Fan
10.5.27.1 Before Removing the Exhaust Fan
10.5.27.2 Removing the Exhaust Fan
10.5.28 DC Power Supply Fan
10.5.28.1 Before Removing the DC Power Supply Fan
10.5.28.2 Removing the DC Power Supply Fan
10.5.29 Fixing Heater Power Supply Cooling Fan
10.5.29.1 Before Removing the Fixing Heater Power Supply Cooling Fan
10.5.29.2 Removing the Fixing Heater Power Supply Cooling Fan
10.5.30 Circulation Duct Fan
10.5.30.1 Before Removing the Circulation Duct Fan
10.5.30.2 Removing the Circulation Duct Fan
10.5.31 Motor of Main Drive Assembly
10.5.31.1 Before Removing the Main Motor
10.5.31.2 Removing the Main Motor
10.5.32 Fixing Driver Motor
10.5.32.1 Before Removing the Fixing Motor
10.5.32.2 Removing the Fixing Motor
10.5.33 Right Door
10.5.33.1 Before Removing the Right Door Unit (Upper)
10.5.33.2 Removing the Right Door Unit (Upper)

Chapter 11. MEAP
11.1 MEAP
11.1.1 Checking the Operating Environment
11.1.2 Setting Up the Network
11.1.3 Setting the method to login to SMS
11.1.4 Login to SMS
11.1.5 Checking Application List
11.1.6 Starting and Stopping a MEAP Application
11.1.7 Checking the Platform Information
11.1.8 MEAP Specifications
11.1.9 Checking the System Information of a MEAP Application with SMS
11.1.10 Printing the System Information of a MEAP Application
11.1.11 Reference (Application System Information)
11.1.12 Installing an Application
11.1.13 MEAP Enterprise Service Manager
11.1.14 Adding a License File
11.1.15 Disabling a License File (suspending a license)
11.1.16 Downloading/Removing an Invalidated License File
11.1.17 Reusable license
11.1.18 License for forwarding
11.1.19 Uninstalling an Application
11.1.20 Changing Login Services
11.1.21 Initializing the Password
11.1.22 Creating a Backup for MEAP Application Area, Formatting the Hard Disk, Restoring the MEAP Application Area
with the Backup, Using the SST (Service Support Tool)
11.1.23 Replacing the Hard Disk Drive
11.1.24 MEAP Safe Mode
11.1.25 Setting HTTP port for MEAP application (level 2)
11.1.26 Reference material
11.1.27 Option for exclusive individual measure

Chapter 12. e-MAINTENANCE / IMAGE WARE REMOTE
12.1 e-maintenance/imageWARE Remote
12.1.1 Application operation mode
12.1.2 Service Center URL and Port Specification
12.1.3 Communication test
12.1.4 Communication log
12.1.5 Detailed Communication log
12.1.6 SOAP communication function
12.1.7 Resend at SOAP transmission error
12.1.8 e-RDS setting screen
12.1.9 Sleep operation
12.1.10 Network Setting (Maintenance)
12.1.11 e-RDS Setting (Maintenance)
12.1.12 Trouble shoot
12.1.13 Error message

Chapter 13. MAINTENANCE AND INSPECTION
13.1 Periodically Replaced Parts
13.1.1 Outline
13.1.2 Reader Unit
13.1.3 Printer Unit
13.2 Durables and Consumables
13.2.1 Outline
13.2.2 Reader unit
13.2.3 Printer Unit
13.3 Scheduled Servicing Basic Procedure
13.3.1 Scheduled Servicing Basic Procedure
13.3.2 Periodical Servicing Chart Reader Unit
13.3.3 Periodical Servicing Chart Printer Unit
13.3.4 Points to Note for Periodical Servicing
13.4 Cleaning
13.4.1 Cleaning Primary Toner Blocking Sheet
13.4.2 Cleaning Developing Toner Blocking Sheet
13.4.3 Cleaning Cleaner Scraper
13.4.4 Cleaning Photosensitive Drum
13.4.5 Cleaning the fixing oil dish and the fixing cleaning belt guide

Chapter 14. STANDARDS AND ADJUSTMENTS
14.1 Image Adjustment Basic Procedure
14.1.1 Making Pre-Checks
14.1.2 Making Checks on the Printer Unit (1/2)
14.1.3 Making Checks on the Printer Unit (2/2)
14.1.4 Making Checks on the Reader Unit
14.1.5 Checking the Potential System
14.1.6 Checking the Surface Potential Control System
14.1.7 Potential Control System Conversion Table
14.1.8 Emergency Measures for a Fault in the Potential Sensor
14.2 Image Adjustments
14.2.1 Standards of Image Position
14.2.2 Checking the Image Position
14.2.3 Adjusting Side Registration
14.2.4 Adjusting the Image Leading Edge Margin
14.2.5 Adjusting the Left/Right Non-Image Width
14.2.6 Adjusting the Leading Edge Non-Image Width
14.3 Scanning System
14.3.1 After Replacing the Reader Controller PCB
14.3.2 When Replacing the CCD Unit
14.3.3 Adjusting the Position of the No. 1/No. 2 Mirror Base
14.3.4 When Replacing the Copyboard Glass
14.3.5 When Replacing the Reading Glass
14.3.6 When Replacing the Scanning Lamp
14.3.7 After Replacing the Inverter PCB
14.4 Laser Exposure System
14.4.1 When Replacing the Scanner Unit
14.5 Image Formation System
14.5.1 Outline
14.5.2 Routing Charging Wire
14.5.3 Routing Grid for Primary Charging Assembly
14.5.4 Adjusting Height of Charging Wire
14.5.5 Mounting Cleaning Blade
14.5.6 Removing Side Seal
14.6 Fixing System
14.6.1 Applying Grease After Replacing the Fixing Roller
14.6.2 Adjusting the Nip Width
14.6.3 Adjusting the Fixing Web Solenoid (SL9)
14.6.4 After Replacing the Fixing Web
14.6.5 Adjusting the Fixing Inlet Guide Solenoid (SL1)
14.6.6 Adjusting the Position of the Fixing Inlet Guide
14.7 Electrical Components
14.7.1 When Replacing DC Controller PCB
14.7.2 When Replacing HVT PCB
14.7.3 After Replacing the HDD
14.7.4 When Replacing the Main Controller PCB
14.8 Pickup/Feeding System
14.8.1 Points to Note When Mounting the Pickup Roller
14.8.2 Points to Note When Mounting the Separation Roller
14.8.3 The Points to Mount the Feeding Roller
14.8.4 Adjusting the Pressure of the Deck/Cassette Separation Roller
14.8.5 Adjusting the Pressure of the Manual Separation Roller
14.8.6 Adjusting the Position of the Pickup Solenoid (SL3, SL4) of the Cassette 3/4
14.8.7 Adjusting the Position of the Delivery Flapper Solenoid (SL5)
14.8.8 Adjusting the Position of the Right Deck Pickup Solenoid (SL6)
14.8.9 Adjusting the Position of the Left Deck Pickup Solenoid
14.8.10 Mounting the Reversing Flapper Solenoid
14.8.11 Attaching the Side Guide Timing Belt in the Manual Feed Tray Assembly
14.8.12 Adjusting the Position of the Lifter Motor M20/M21 of the Cassette 3/4

Chapter 15. CORRECTING FAULTY IMAGES
15.1 Making lnitial Checks
15.1.1 Site Environment
15.1.2 Checking the Originals for Symptoms
15.1.3 Copyboard Cover, Copyboard Glass, and Standard White Plate
15.1.4 Checking the Charging Assemblies
15.1.5 Checking the Developing Assembly
15.1.6 Checking the Paper
15.1.7 Checking the Periodically Replaced Parts
15.1.8 Image Adjustment Basic Procedure
15.1.9 Others
15.2 Outline of Electrical Components
15.2.1 Clutch/Solenoid
15.2.1.1 Clutches and Solenoids
15.2.2 Motor
15.2.2.1 Motors
15.2.3 Fan
15.2.3.1 Fans
15.2.4 Sensor
15.2.4.1 Sensors
15.2.5 Switch
15.2.5.1 Switches
15.2.6 Lamps, Heaters, and Others
15.2.6.1 Lamps, Heaters, and Others
15.2.7 PCBs
15.2.7.1 PCBs
15.2.8 Connectors
15.2.8.1 Connectors
15.2.9 Variable Resistors (VR), Light-Emitting Diodes (LED), and Check Pins by PCB
15.2.9.1 Variable Resistors (VR), Light-Emitting Diodes, and Check Pins by PCB
15.2.9.2 DC Controller PCB
15.2.9.3 DC Power Supply PCB
15.2.9.4 HVT PCB

Chapter 16. SELF DIAGNOSIS
16.1 Error Code Table
16.1.1 Error Code
16.2 Error Code Details
16.2.1 Detail Error Code
16.2.2 E602 in Detail
16.3 Error Code (SEND)
16.3.1 Results of Self-Diagnosis
16.3.2 Error Codes
16.4 Jam Code
16.4.1 Jam Code (machine proper)
16.4.2 Jam Code (finisher-related)
16.4.3 Jam Code (ADF-related)
16.5 Alarm Code
16.5.1 Alarm Code

Chapter 17. SERVICE MODE
17.1 Outline
17.1.1 Service mode screen configuration
17.1.2 Entering or selecting service modes
17.1.3 Exiting service modes
17.1.4 Backing Up Service Mode
17.1.5 Initial screen
17.1.6 Main/intermediate item screen
17.1.7 Sub-item screen
17.2 DISPLAY (Status Display Mode)
17.2.1 COPIER
17.2.1.1 COPIER List
17.2.2 FEEDER
17.2.2.1 FEEDER List
17.3 I/O (I/O Display Mode)
17.3.1 Outline
17.3.2 R-CON
17.3.3 FEEDER
17.3.4 SORTER
17.3.5 MN-CON
17.3.6 P-CON
17.4 ADJUST (Adjustment Mode)
17.4.1 COPIER
17.4.1.1 COPIER List
17.4.2 FEEDER
17.4.2.1 FEEDER List
17.4.3 SORTER
17.4.3.1 SORTER List
17.5 FUNCTION (Operation/Inspection Mode)
17.5.1 COPIER
17.5.1.1 COPIER List
17.5.2 FEEDER
17.5.2.1 FEEDER List
17.6 OPTION (Machine Settings Mode)
17.6.1 COPIER
17.6.1.1 COPIER List
17.6.2 FEEDER
17.6.2.1 FEEDER List
17.6.3 SORTER
17.6.3.1 SORTER List
17.6.4 BOARD
17.6.4.1 BOARD List
17.7 TEST (Test Print Mode)
17.7.1 COPIER
17.7.1.1 COPIER List
17.8 COUNTER (Counter Mode)
17.8.1 COPIER
17.8.1.1 COPIER List

Chapter 18. UPGRADING
18.1 Outline
18.1.1 Outline of Upgrading the Machine
18.1.2 Outline of the Service Support Tool
18.2 Making Preparations
18.2.1 Registering the System Software
18.2.2 Making Connections
18.3 Formatting the HDD
18.3.1 Formatting All Partitions
18.3.2 Formatting Selected Partitions
18.3.3 Formatting the Partitions
18.4 Downloading System Software
18.4.1 Downloading System
18.4.1.1 Outline
18.4.1.2 Downloading Procedure
18.4.2 Downloading RUI, and Language
18.4.2.1 Outline
18.4.2.2 Downloading Procedure
18.4.3 Downloading SDICT
18.4.3.1 Outline
18.4.3.2 Downloading Procedure
18.4.4 Downloading MEAPCONT
18.4.4.1 Outline
18.4.4.2 Downloading Procedure
18.4.5 Downloading KEY
18.4.5.1 Outline
18.4.5.2 Downloading Procedure
18.4.6 Downloading the TTS
18.4.6.1 Outline
18.4.6.2 Downloading Procedure
18.4.7 Downloading BOOT
18.4.7.1 Outline
18.4.7.2 Downloading Procedure
18.4.8 Downloading Dcon and Rcon
18.4.8.1 Outline
18.4.8.2 Downloading Procedure
18.4.9 Downloading G3 FAX
18.4.9.1 Outline
18.4.9.2 Downloading Procedure
18.4.10 Uploading and Downloading Backup Data
18.4.10.1 Outline
18.4.10.2 Uploading Procedure
18.4.10.3 Downloading Procedure
Chapter 19 Service Tools
19.1 Service Tools
19.1.1 List of Special Tools
19.1.2 List of Solvents/Oils

Numbers of pages: 646.
File Data

This file is sold by onedollar, an independent seller on Tradebit.

Contact onedollar More Files from onedollar
Our Reviews
© Tradebit 2004-2024
All files are property of their respective owners
Questions about this file? Contact onedollar
DMCA/Copyright or marketplace issues? Contact Tradebit